The LaserTachTM ICP® tachometer from The Modal Shop, Inc., senses the speed of rotating equipment while powered with standard ICP® sensor signal conditioning – the same conditioning as ICP® accelerometers. Only a single inexpensive coaxial or twisted pair cable connection is required. Since no additional or specialized external power source is needed, this facilitates deployment of multiple tachometer sensors using the same cabling scheme as with other ICP® sensor arrays for acquiring dynamic vibration, pressure, strain or force data.
A red status LED provides positive, visual indication of proper signal pickup. The standard BNC jack connects the sensor to any constant current IEPE conditioned data acquisition systems and signal conditioners. The LaserTach operates using the standard 2 to 20 mA current supplied by any constant current IEPE conditioned data acquisition systems and all ICP® sensor signal conditioners. Because of its one pulse per revolution output, the LaserTach eliminates the need to over sample all channels due to high frequency tachometer signals.
The sensor will measure from as far as 20 inches, at speeds up to 30,000 rpm. The LaserTach’s optical detection mechanism does not require the rotating equipment to be a ferrous material, unlike magnetic tachometer pickups -- only a visually contrasting section of the shaft needs to be available, typically using a small piece of retro-reflective tape. The LaserTach’s long-range optics and standard 5/8” UNF threaded bolt package allow for flexibility in positioning and mounting.
For more information on the LaserTach or other unique test accessories, contact THE MODAL SHOP, INC., 3149 E. Kemper Road Cincinnati, OH 45241-1516, Internet: www.modalshop.com, (800) 860-4867, Fax (513) 458-2172 or e-mail: firstname.lastname@example.org.
ICP is a registered trademark of PCB Group Inc.
LaserTach is a trademark of The Modal Shop, Inc.