Larson Davis LxT Preconfigured Kits and Options
Standard LxT Kits
The Larson Davis LxT is great for walkaround workplace noise surveys for plant surveys and task analysis, with voice annotation. Similar hardware to the Larson Davis 831, the LxT has a slightly higher noise floor and lower dynamic range, limited speed for time and no ability to record sound files or connect to GPS.
|
|
 |
KLxT1L |
Logging Analyzer Kit |
KLxT1H |
Logging Analyzer Kit with 1/1 and 1/3 Octave |
KLxT-QPR |
Logging Analyzer Kit with 1/1 and 1/3 Octave plus low sensitivity microphone for high dB levels to above 165dB |
▼ Firmware Details
Firmware specifics for each kit
|
|
KLxT1L
|
KLxt1H
|
KLxT-QPR
|
LxT-LOG |
Logging of Time Histories
increments from 1s to 24hr |
• |
• |
• |
LxT-ENV |
Environmental Data Logging
time interval from 1 min to 24 hours |
• |
• |
• |
LxT-OB3 |
Selectable Real Time
1/1 and/or 1/3 octave frequency analysis |
º |
• |
• |
LxT-DVA |
Digital Voice Annotation |
• |
• |
• |
• - Standard with Rental º - Optional Addition
▼ Included Accessories
Complete list of accessories included with each kit
377B02 |
1/2" freefield microphone (use built-in filter of LxT for random incidence response) |
PRMLxT1 |
Preamplifier for 1/2" microphone |
EXC010 |
Switchcraft 5 pin Microphone Extension Cable, 10ft |
KBAT15 |
AA battery kit for short term use, with recharger |
PSA029 |
AC power adapter |
CBL138 |
USB cable to connect to AC adapter or computer |
WS001 |
3-1/2" windscreen for 1/2" microphones |
SWW-SLM-UTILG3 |
Utility software allows download, upgrade, translate, print text reports or export to spreadsheet |
Accessories |
Calibration data, manual sets, computer interface accessories and an acoustic calibrator |
LxT Kits for Unattended Monitoring
SoundExpert LxT Noise Monitoring Kit for unattended monitoring in a wide variety of environmental situations.
 |
NMS-SE-FF |
Outdoor Logging Noise Monitoring System with 1/1 and 1/3 Octave |
▼ Firmware Details
Click to view the specific firmware included with each kit.
|
|
NMS-SE-FF
|
LxT-LOG |
Logging of Time Histories
increments from 20ms to 24hr |
• |
LxT-ENV |
Measurement History
exceedance/event logging, intervals and daily histories |
• |
LxT-OB3 |
Selectable Real Time
1/1 and/or 1/3 octave filter set |
• |
LxT-DVA |
Industrial Hygiene
2 selectable doses including OSHA, ACGIH, NIOSH, IEC standards |
º |
• - Standard with Rental º - Optional Addition
▼ Included Accessories
Click to view the complete list of accessories included with each kit.
377B02 |
1/2" freefield microphone (use built-in filter of 831 for random incidence response) |
PRM831 |
Preamplifier |
EPS2108-2 |
Environmental Protection Kit, includes large windscreen, bird spikes, desiccant |
EPS042 |
Outdoor case, includes D-cell battery pack, charger and cabling |
EXC010 |
Microphone extension cable, 10ft |
PSA029 |
AC power adapter |
CBL138 |
USB cable to connect to AC adapter or computer |
Software |
Utility software for meter setup and data download |
Accessories |
Calibration data, manual sets, computer interface accessories and an acoustic calibrator |
Batteries are not included but can be purchased: D-CELL 8PK | 8-pack of D-Cell batteries
For a list of Optional LxT Accessories click here.
|